How Much Does a Pool Table Weigh?
A slate pool table weighs about 600 to 1,200 pounds depending on size and build, and most of that is the stone. A non-slate (MDF) table weighs roughly 200 to 320 pounds. Real listings show the spread: Playcraft's 8-foot Charles River lists 700 pounds, while Diamond's 8-foot Professional lists 1,000.
The gap between those two 8-footers is why one-number answers online disagree so much. Below are weights by size from makers' own specs, what the slate alone weighs, what each piece weighs when you move it, and what all of it means for your floor.
Pool table weight by size
| Table | Typical complete weight | Real examples |
|---|---|---|
| 7 ft MDF or engineered wood | About 200 to 300 lb | Maxsa 7 ft 217 lb, Hathaway Hustler 238 lb, RACK Draco 282 lb |
| 8 ft MDF or 3-in-1 combo | About 300 to 400 lb | GoSports 8 ft 3-in-1 320 lb |
| 7 ft slate | About 600 to 800 lb | Legacy Baylor II 600 lb, Valley Panther 93 in 710 lb, Diamond Professional 800 lb |
| 8 ft slate | About 700 to 1,000 lb | Playcraft Charles River 700 lb, Valley Panther 101 in 865 lb, Diamond Professional 1,000 lb |
| 9 ft slate | About 900 to 1,200 lb | Diamond Professional 1,200 lb |
| Oversize and heavy commercial (9 to 12 ft) | About 1,500 to 2,500 lb | Billiards Direct's planning range |
The ranges come from the makers' spec pages and listings named in the table, cross-checked against Billiards Direct's moving guide and Imperial, which says tables often weigh 700 to 1,000 pounds. Brunswick and Olhausen don't publish weights, so for those, ask the dealer.
Why two 8-foot slate tables can differ by 300 pounds
Four things move the number.
- Slate thickness. One-inch slate is about a third heavier than 3/4 inch. Many entry-level tables use 3/4 inch.
- The cabinet. A plywood or furniture cabinet on four legs weighs far less than a commercial cabinet with heavy beams, a ball return and a full apron. Diamond builds the second kind.
- Wood backing. Most slate has a wood frame glued underneath so the cloth can be stapled to it. It adds weight that density math doesn't count.
- What's being measured. Some articles quote the slate, some the whole table, some the shipping weight with crates. A figure that sounds wrong is often just measuring something else.
So the Charles River at 700 pounds isn't suspicious. A 1-inch slate set of about 500 pounds plus a hardwood cabinet and rails lands right there. A commercial 8-footer with a heavy frame lands near 1,000.
How much does slate pool table slate weigh by itself?
Slate has a specific gravity of about 2.7 to 2.8, roughly 14 to 14.6 pounds per square foot for every inch of thickness. The slab is bigger than the playing surface because it runs under the rails. These are the estimates from our slate thickness guide, before pocket cuts and wood backing:
| Table | 3/4 in slate, total | 1 in slate, total | Each piece of three (1 in) | Each piece of three (3/4 in) |
|---|---|---|---|---|
| 7 ft | About 280 to 295 lb | About 375 to 390 lb | About 125 to 130 lb | About 95 lb |
| 8 ft | About 365 to 380 lb | About 485 to 505 lb | About 160 to 170 lb | About 120 to 125 lb |
| 9 ft | About 455 to 475 lb | About 610 to 635 lb | About 200 to 210 lb | About 150 to 160 lb |
Add a few pounds per piece for the wood backing. Billiards Direct gives a planning range of 150 to 250 pounds per piece, which covers the heavier 9-foot and thick-backed slabs. A one-piece slate from a 7-foot bar table is 400 to 600 pounds in one slab, by the same source.
The share is what surprises people: on most slate tables the stone is well over half the total weight.
Real slate or not? Let the weight decide
If a full-size table claims slate and weighs under about 400 pounds, it isn't stone. Sellers use words like Slate-Tech, Slatron, Accuslate and "slate-like" for engineered tops, and photos can't tell you the difference. The shipping weight on a product page is harder to fudge than the description above it.
The Fat Cat Reno with its Accuslate surface, for example, lists 313 pounds. Compare that with 600 pounds for the smallest real slate table in our chart. What those materials are and how they hold up is covered in slate vs MDF pool tables.
Can your floor hold a pool table?
On a code-built floor, almost always. The 2021 International Residential Code (Table R301.5) designs living areas for a live load of 40 pounds per square foot and sleeping areas for 30. Diamond's Pro-Am lists 1,000 pounds on a 104 by 59 inch cabinet at 8 feet, which averages about 23.5 pounds per square foot. The 9-foot version, 1,200 pounds on 114 by 64 inches, works out about the same, roughly 24.
Two caveats keep that from being the whole story:
- The weight reaches the floor through four to six legs, not spread evenly, and players stand around the table on top of it. That's why engineers check the joists under the legs, not just the average.
- Strength isn't the same as stiffness. A floor that carries the load can still bounce enough to move a slow ball when someone walks past. That matters more for play than any risk of failure.
Ground floors on a slab and basements are the easy case. Upper floors, long spans, bonus rooms over garages and finished attics deserve a closer look, which our guide to putting a pool table upstairs walks through.
What the weight means when you move it
Nobody moves a slate table in one piece. It comes apart into parts that a crew can lift:
| Part | Approximate weight | Lift |
|---|---|---|
| One slate piece, 7 or 8 ft, 1 in | About 125 to 170 lb plus backing | Two people minimum, three on stairs |
| One slate piece, 9 ft, 1 in | About 200 to 210 lb plus backing | Three people |
| One-piece bar slate | 400 to 600 lb | Pro crew with equipment |
| Rails, legs, frame | Light to moderate | One or two people |
| Whole MDF table, legs off | About 200 to 320 lb | Two or three people |
The order of work is in how to take apart a pool table, hauling and crew size in how to move a pool table, and what a pro charges in pool table moving cost.
One rule worth repeating: don't drag or tip an assembled slate table, even across a room. Lifting one corner racks the frame and cracks the seam filler between the slabs.
Is heavier better?
Up to a point. The weight comes mostly from slate, and slate is what keeps a bed flat for decades and lets an installer re-level it after every move. An MDF table at 250 pounds is easy to carry and fine for kids and casual games, but the bed can sag or wave with humidity and load over the years.
Past that, extra pounds buy diminishing returns. A 1,000-pound commercial frame is built to survive bar abuse and resist being bumped out of level. A home table at 700 pounds with 1-inch, three-piece slate plays just as true in a quiet basement. Pick on slate spec and frame quality, not the scale. Our best slate pool tables lists current picks with their weights.
Sources
- Diamond Billiards Professional (800, 1,000 and 1,200 lb for 7, 8 and 9 ft)
- Diamond Billiards Pro-Am (assembled dimensions and weights)
- Playcraft Charles River 8 ft Amazon listing (1 in slate, 700 lb, 99 x 55 in; product card above)
- Imperial, professional installation (tables often 700 to 1,000 lb)
- Billiards Direct, pool table moving guide (weights by type, per-piece and one-piece slate)
- 2021 International Residential Code, chapter 3 (Table R301.5 live loads)
- Wikipedia: Slate (specific gravity)
Our picks
Links open the current selection and price on Amazon so you can compare real reviews before buying.
Playcraft Charles River 8 ft Slate Pool Table
A slate 8-footer at the light end1-inch framed, book-matched slate honed to a thousandth of an inch, in a 99 by 55 inch hardwood cabinet that lists 700 pounds. That's real stone at a weight most upper floors and stairways handle better than a commercial 1,000-pounder. Playcraft recommends an experienced billiard installer.
Check price on Amazon
KEEPER Two-Person Lifting and Moving Straps
Lifting slate pieces and the cabinetTwo 3-inch straps rated to 800 pounds put the load on your arms and legs instead of your fingertips. A slate slab has no handholds, so this is the cheapest insurance against a dropped corner.
Check price on Amazon
12-Inch Master Precision Machinist Level
Checking slate level after it settlesA heavy table on a wood floor can settle a little in the first weeks. A machinist level reads far finer than a carpenter's level, so you see the drift before a slow ball does.
Check price on Amazon
POMER Pool Table Cover for 8 ft Tables
Protecting an installed tableSized 100 x 56 x 32 inches with a drawstring hem, it keeps dust and spills off the cloth of a table you paid to have carried in and leveled.
Check price on AmazonFrequently asked questions
How much does a pool table weigh?
A slate table weighs about 600 to 800 pounds at 7 feet, 700 to 1,000 pounds at 8 feet and 900 to 1,200 pounds at 9 feet. Non-slate MDF tables weigh about 200 to 320 pounds.
How much does a slate pool table weigh?
Most home slate tables list 600 to 1,000 pounds complete. Examples: Legacy Baylor II 7 ft 600 pounds, Playcraft Charles River 8 ft 700, Diamond Professional 8 ft 1,000.
How much does the slate on a pool table weigh?
By density, 1-inch slate for an 8-foot table is about 485 to 505 pounds, or 160 to 170 pounds per piece of three. A 9-foot set is about 610 to 635 pounds. Three-quarter-inch slate weighs about a quarter less.
How heavy is one piece of pool table slate?
For 1-inch three-piece slate, about 125 to 130 pounds on a 7-footer, 160 to 170 on an 8-footer and 200 to 210 on a 9-footer, plus the wood backing. A one-piece bar-table slate is 400 to 600 pounds.
How much does a 9 foot pool table weigh?
About 900 to 1,200 pounds for a slate 9-footer. Diamond lists its 9-foot Professional at 1,200 pounds.
How much does a 7 foot bar pool table weigh?
Coin-op bar tables are heavy for their size. Valley lists its 93-inch Panther at 710 pounds and Diamond lists its 7-foot Professional at 800.
Do I need to reinforce my floor for a pool table?
Usually not on a code-built floor. Living areas are designed for 40 pounds per square foot and bedrooms for 30, and a 1,000-pound 8-footer averages about 24 over its footprint. Old houses, cut joists, long spans and finished attics are worth having checked.
Can I move a slate pool table without taking it apart?
Not safely beyond a few feet. Tipping or dragging an assembled slate table racks the frame and cracks the seams. Any real move means taking it apart and carrying the slate in pieces.
Related guides
LeaguePool is reader-supported. When you buy through links on this site we may earn an affiliate commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.